Liquid Nails Rapid Cure is an advanced, high performance polyurethane construction adhesive that cures in just 10 minutes*. It provides the ultimate strength in the Liquid Nails range. It is a durable, waterproof bond even when bonding two non porous surfaces. It bonds most building substrates.
- Fast cure in 10 minutes*.
- More than twice the strength of conventional solvent- based construction adhesives.
- Waterproof - Uncompromising durability, with excellent water, weather and heat resistance
- Can be used to bond most materials, and for most interior & exterior applications.
- Its advanced formulation exceeds the requirements of BS-EN204 D4 for durability.
- Resistant (after full cure) to heat to 100°C and cold to -15°C
- Does not drip, sag or string between panels.
- Bridges gap up to 3mm hence can be used on rough and ill-fitting construction materials.
- Product expands slightly as it cures.
- Dried adhesive is paintable.
*Expect longer times for very 'dry' timber, heavier objects and less porous surfaces, or in colder weather. Spraying surfaces with a very light mist of water may help to speed up cure
Ideal for:
- Where extra water resistance is essential. eg. Exterior applications such as decking.
- Where extra strength is required.
- Where extra temperature resistance is required. eg. Applications where metal substrates are exposed to direct sunlight.
- Plastic substrates which are sensitive to solvent based adhesives are used.
- Metal installations in which solvent based adhesives will be slow to cure.
- Liquid Nails Rapid Cure is also suitable for typical construction applications such as:
- Sheet flooring to joists
- Metal or aluminium door strips to floors or walls
- Timber or fibre cement sheeting to cement block or brick walls
- Masonite
- Timber
- MDF
- Plasterboard
- Plastics (Pre-test to determine suitability)
- Masonry
- Concrete
- Particleboard
- Metals
- Rubber
- Tiles
- LOSP treated pine